Sequoia Panels: 100% biobased and fire-resistant exterior wall panels

The Sequoia facade panels from Made of Air—for which Fiberplast Group has become a dealer—store more CO2 than their production requires. These highly decorative, fire-resistant facade panels are made from wood waste. This means (as Fiberplast likes to emphasize) that no trees are cut down for them, and no new raw materials are used.

Sequoia is made from biochar. Biochar is a carbon-rich material produced from biomass in a low-oxygen environment. The resulting biochar is bound with a binder made from sugarcane waste, creating a thermoplastic granulate that is heated and pressed into panels under high pressure. This produces a hard, lightweight panel with exceptional fire resistance without any environmentally harmful additives. Because Sequoia panels are made entirely from natural raw materials, the panels are 100% biobased!

Carbon Negative

Because Sequoia facade panels store more CO2 than is released during the production process, Sequoia is CO2-negative, or carbon-negative. The panels are removable and, after their extremely long service life, fully recyclable.

The facade panels are made from raw materials that have been responsibly sourced within Europe. The energy required to manufacture the panels is generated entirely in-house using solar panels.

The relatively lightweight panels (8.8 kg/m²) are available in 2 surface textures and 9 attractive colors. There is a completely smooth panel and a panel with “Air Texture.” Combined with the color palette, these panels can be used to design highly attractive facades.

Sequoia panels, which are fire-resistant exterior cladding, can therefore be used in virtually any situation where exterior cladding is required that must meet strict fire safety standards. The panels have a fire rating of B-s2-d0 (EN 13501-1), standard dimensions of 450 x 1000 mm, and are 8 mm thick.

Sequoia sets the standard in biobased and circular siding!

Anti-Noise tegel voor warmtepompen

Prevent noise and vibrations from your heat pump

An Envirolift Anti-Noise tile helps prevent annoyances such as increased noise and vibrations. Your heat pump can cause a nuisance due to vibrations and noise, especially if the unit is installed on the roof. Many flat roofs are well-suited for installing a heat pump, and this is often an excellent solution for saving on gas and keeping the unit out of sight. All heat pumps (including those in air conditioning units) generate noise and slight vibrations. Over time, these vibrations—and consequently the noise—can increase significantly, causing a nuisance and reducing the enjoyment of your home.

Pressure Distribution and Drainage

Fiberplast Group has the perfect solution: the Anti-Noise tile! This tile is designed to insulate against noise and vibrations. An Anti-Noise tile has a large surface area (1 m²) to distribute the pressure from the heat pump evenly across the roof surface and features large square ridges on the underside. Thanks to these large ridges, the sound-insulating tile does not impede water drainage.

Protecting the environment and saving on gas is great, but of course you don’t want it to cause any inconvenience. That’s why Fiberplast Group has specifically designed this solution. The tile is made from PUR-bonded (recycled) SBR rubber. The rubber is rot-proof, mold-resistant, and low in PAHs. The tile can be safely used on all types of roofing, except for PVC roofs. On PVC roofs, the tile must be insulated from the PVC to prevent plasticizer migration.

Would you like to install the heat pump on the vibration-dampening tile, but at a higher level? Take a look at our other website

For more information, please call 0512-544503, or feel free to email us at Info@fiberplast.nl.

 

CTECHplus

Dasso® CTECHplus decking components

Dasso® CTECHplus bamboo decking boards are the longest bamboo decking boards we offer. With a length of 3.05 meters, these boards are ideal for quickly installing attractive patios.

Unlike the other CTECH decking components, theThe planks have straight edges on the ends, just like traditional tropical hardwood planks. The CTECHplus planks therefore do not have tongue-and-groove joints. The CTECHplus planks can be used on both sides thanks to their ribbed and smooth sides.

Ceramix Technology

An exclusive product that opens up new possibilities for your deck with its unique caramel-colored planks, made from renewable bamboo. Each Dasso® CTECH plank is treated with Dasso’s advanced CeramiX technology. This treatment results in a lighter color and ensures the following high-quality properties: durability class 1, high fire resistance (B-s1-d0 EN13501-1), and high stability.

Dasso® CTECH products are specifically designed for outdoor conditions and have a service class of 4, which guarantees that the material will not rot in exposed environments. This makes it an ideal material for damp areas and outdoor applications.

CTECH-Plus decking boards can be finished with special edge boards (corner boards), as well as start and end boards. (Standard lengths of 1850 mm).

Maintenance-free

In addition, Dasso bamboo requires no maintenance; it will weather over time, but this does not affect its quality. If you wish to preserve its distinctive caramel color, regular oiling is necessary. With a lifespan of at least 25 years, it is a unique and valuable investment.

Experience

Dasso has more than 30 years of experience in the development and production of bamboo building products. Dasso holds numerous international patents and supplies products to 56 different countries. With an annual production of 8 million square meters, Dasso is one of the largest bamboo producers in the world. Dasso controls the entire production process, from planting the bamboo to delivering the final product. This ensures a consistently high level of quality.

You can learn more about Dasso in this video.

Dasso® CTECH gevelplank

Dasso® CTECH Siding

Dasso® CTECH siding adds “wooden” accents to your projects. It embodies an organic look with an elegant tranquility and the soothing warmth that comes with it. A safe cladding system with a high fire rating (B-s1-d0 EN13501-1, end-use certificate available) and a naturally luxurious appearance. We’ll share more information about fire-safe cladding in this blog post.

This material is made from renewable bamboo, making it an eco-friendly alternative to other types of wood. Dasso Bamboo is biobased and has a carbon content of 87%. With Dasso Bamboo, you can build sustainably using biobased materials. In our blog, we discuss biobased construction and its benefits in more detail. The advanced CeramiX technology guarantees excellent long-term performance when used in outdoor environments, making it the best natural and eco-friendly option for facades instead of aluminum, plastic, or wood. Thanks to its durability class 1 rating, high fire resistance, and high stability, it is a safe choice for any construction project.

Outside and Inside

Dasso® CTECH products are specially designed for outdoor conditions. Service Class 4 guarantees that the material will not rot in environments where it is exposed to the elements. This makes Dasso Bamboo the perfect material for exterior facades and damp areas such as swimming pools. Of course, Dasso® CTECH is also ideal for indoor use.

Dasso CTECH Indoor and Outdoor

Furthermore, bamboo requires no maintenance to remain under warranty. This makes it a unique and valuable investment—the total cost of ownership is extremely low!

A tongue-and-groove joint on the ends ensures easy installation, and a rebated profile on the sides allows for full clip coverage. This makes it easy to create a closed facade with hidden fasteners. A straight plank is also available, which is installed using clips as well. This allows you to easily create an open facade. Both profiles can be installed horizontally or vertically.

 

Dasso XTR gevelbekleding rabat sponningdeel

Dasso® XTR Siding

Dasso® XTR facade cladding made of fused bamboo adds beautiful accents to your projects and ensures that the building blends seamlessly with its surroundings. This creates a unique, fire-resistant facade that lends an organic feel. These sustainable panels, made from fast-growing and renewable bamboo, feature Dasso’s patented thermal and fusion treatment (Fused Bamboo®). This results in extremely hard, dense, and durable bamboo products and prevents the bamboo from being damaged by external factors. This patented process gives the XTR siding its deep brown color, which weathers just like hardwood. To maintain the deep, dark color, you should oil the siding regularly.

Maintenance-free

Dasso® XTR siding made of fused bamboo requires no maintenance to remain under warranty. That is why a Dasso Bamboo siding installation is a unique and valuable investment.

The siding is available in two types. A Z-shaped rebated panel with a tongue-and-groove joint on the ends. This results in a sealed facade with a high fire rating. There is also an attractive rhombus profile for a more playful facade.

 

Dasso Soffit plafondbekleding shiplap

Dasso® CTECH Soffit Ceiling Cladding

Dasso® CTECH Soffit Ceiling Cladding adds “wood-like” accents to your projects and creates an organic look with the elegant tranquility and soothing warmth that come with it.

This material is made from fast-growing, renewable bamboo, making it an environmentally friendly alternative to other types of wood. The advanced CeramiX technology ensures excellent long-term performance in outdoor environments, making it the best natural and eco-friendly option with its Class 1 durability rating and high stability. Its low cost of ownership makes it a safe and cost-effective option for any construction project.

Use Class 4

Dasso® CTECH products are specially designed for outdoor use, with a service class of 4. This ensures that the material will not rot in exposed environments. As a result, it is the perfect ceiling covering material for damp areas.

Furthermore, Dasso® Soffit ceiling panels require no maintenance to remain under warranty. This is one of the reasons why it is a unique and valuable investment that gives your building a luxurious and natural look.

There are two profiles available: T&G for easy installation in an open facade, and a shiplap profile that allows for full clip coverage, enabling invisible installation in a closed facade.

Dasso Bamboo has a high fire resistance rating.

Dasso XTR balk

Dasso® XTR Beams

Dasso® XTR Beams are solid, high-density bamboo beams. Dasso® XTR beams are made from compressed bamboo fibers using a special, patented heat-treatment process called Fused Bamboo®. This makes it one of the strongest, hardest, and most durable materials on the market. With it, you can create the perfect space for outdoor entertainment and relaxation.

The bamboo beams can be used for a variety of general-purpose applications, but they can also be combined with other Dasso bamboo siding products.

Beams made of sustainable bamboo are quick to install and very cost-effective in terms of both purchase and maintenance. The beams are available in three different widths—58, 85, and 120 mm—and are all 40 mm thick.

Bamboo: Strong, hard, stable

The strong and stable bamboo beams are produced using the patented Fused Bamboo® process. In this process, the harvested bamboo is first split into long strands. These strands are then compressed (fused) under high pressure and heat to form an extremely dense, stable, and weather-resistant material.

Through this process, Dasso® XTR products become extremely hard (harder than hardwood) and are resistant to mold, rot, and pests such as termites. This process gives Dasso® XTR its unique dark color. If you prefer a light caramel color, choose Dasso CTECH with its patented CeramiX technology.

The Dasso Group has been in business since 1993 and is one of the world’s largest suppliers of bamboo.

Dasso XTR vlonder geribbeld

Dasso® XTR Decking Components

Dasso® XTR is a solid, high-density decking board. Dasso® XTR decking boards are made from compressed bamboo fibers using a special, patented heat-treatment process called Fused Bamboo®. This makes it one of the strongest, hardest, and most durable materials on the market. With it, you can create the perfect space for outdoor entertainment and relaxation.

Tongue and groove

A unique feature of Dasso® XTR is the tongue-and-groove joint: this is only possible with highly stable materials. This makes it possible to join an unlimited number of planks end-to-end. The difference in the surfaces on both sides allows you to choose between a grooved or smooth surface. Like all untreated tropical hardwoods, Dasso® XTR will weather over time when exposed to outdoor conditions. This creates a very natural look. If you wish to preserve the original color, regular oiling is sufficient.

Decking made from sustainable bamboo is quick to install and very cost-effective in terms of both purchase price and maintenance. The tongue-and-groove joints on the ends create a seamless deck with a luxurious look.

Strong, hard, stable

The strong and stable decking planks are manufactured using the patented Fused Bamboo® process. In this process, the harvested bamboo is first split into long strands. These strands are then compressed (fused) under high pressure and heat to form an extremely dense, stable, and weather-resistant material.

Through this process, Dasso® XTR decking components become extremely hard (harder than hardwood) and are resistant to mold, rot, and pests such as termites. This process gives Dasso® XTR its unique dark color. If you prefer a light caramel color, choose Dasso CTECH with its patented CeramiX technology.

 

Dasso CTech Smooth

Dasso® CTECH Decking Components

Dasso® CTECH bamboo decking; an exclusive product that offers new possibilities for your patio with unique caramel-colored planks made from renewable bamboo. Each Dasso® CTECH plank is treated with Dasso’s advanced CeramiX technology. This treatment results in a lighter color and guarantees high-quality properties: durability class 1, high fire resistance (B-s1-d0), and excellent stability.

Dasso® CTECH products are specifically designed for outdoor conditions and have a service class of 4, which guarantees that the material will not rot in exposed environments. This makes it an ideal material for damp areas and outdoor applications.

Maintenance-free

In addition, Dasso bamboo requires no maintenance; it will weather over time, but this does not affect its quality. If you wish to preserve its distinctive caramel color, regular oiling is necessary. With a lifespan of at least 25 years, it is a unique and valuable investment.

Thanks to the tongue-and-groove joint on the ends, installation is easy and there are no end seams. This creates a deck with a luxurious look and a seamless, discreet fit.

Experience

Dasso has more than 30 years of experience in the development and production of bamboo building products. Dasso holds numerous international patents and supplies products to 56 different countries. With an annual production of 8 million square meters, Dasso is one of the largest bamboo producers in the world. Dasso controls the entire production process, from planting the bamboo to delivering the final product. This ensures a consistently high level of quality.

You can learn more about Dasso in this video.

We zoeken naar meer..

About the Brand

Read more

Residence in Gouda, RIWOOD Siding

In the fall of 2023, this beautiful home in Gouda was renovated by the Verspeek construction company from Goudriaan. Hollow-core profiles made of RIWOOD rice husk composite were chosen for the exterior cladding.

This has added a beautiful circular facade finish to the home, giving it a very sleek and luxurious look.

Home Expansion in Ulvenhout, RIWOOD PK7518

During the expansion of a private residence in Ulvenhout, Brabant, the construction company Erik Bastiaansen used RWIOOD hollow-core siding for the exterior finish. This material was chosen because of RIWOOD’s biobased and circular nature.

The color used here is truly unique! This color was produced at the customer’s request and closely matches C51 Walnut from our Inspiration Line. Colors from the Inspiration Line give customers the opportunity to create a more personalized exterior. The intensity of the colors can be adjusted, ensuring an exclusive look every time.

Hoogeboom Raalte - New Headquarters Building

For the exterior cladding of the new headquarters of recycling specialist Hoogeboom BV in Raalte, management opted for 100% circular RIWOOD rice husk composite.

Over 180 m² of the facade is clad with RIWOOD PP20020 fire-resistant rice husk composite in the color Teak. The facade profiles are installed invisibly using the KOMO-certified adhesive system from Dynamic Bonding Systems. This has resulted in an even more attractive appearance. The parapet of the rooftop terrace is also clad with RIWOOD PP profiles.

Custom solutions were implemented for this project to minimize material waste. This is fully in line with Hoogeboom’s circular philosophy.

Recent Posts

New European Fire Safety Standard EN 16755:2026: What Does It Mean and What Does It Entail?

From now on, architects, contractors, facade builders, and project developers must not only take into account a product’s fire rating and the construction of, for example, a wall (End-Use), but also whether those performance characteristics are maintained throughout the product’s service life. The new European fire safety standard EN 16755:2026 sets additional requirements for this. […]

New European Fire Safety Standard EN 16755:2026

RIWOOD Featured in Jongeneel and PontMeyer’s Facade Brochure

RIWOOD fire-resistant siding is featured in the new facade brochures from Jongeneel and PontMeyer. The building materials wholesalers Jongeneel and PontMeyer (both part of the TABS Group) have released new facade brochures. In these brochures, they present a wide range of professional solutions for sustainable and future-proof facades. RIWOOD is also prominently featured in them. […]

Jongeneel and PontMeyer Facade Brochures

Biobased Sound Barriers, Sustainable Road Design

As early as 2018, Fiberplast Group supplied Envirodeck Soundboard for a 400-meter biobased noise barrier at locations including Vroonermeer Noord along the N254. Sustainable, biobased Envirodeck is a wood composite made entirely from waste streams. No new raw materials are used to make this sustainable product. For years now, interest in products with a low […]

biobased sound barrier

From the Building Code to the BBL: What Has Changed Regarding Escape Routes?

Emergency Exits and Fire Safety: What Does That Mean for Floor Finishes? In the event of a fire, every second counts. That is why Dutch building codes impose strict requirements on escape routes: the paths along which people must be able to safely exit a building. Not only the length, width, or location of an […]

BBL: Escape Routes and Fire Safety

Designing Fire-Safe Escape Routes

In high-rise buildings, it is essential that safe escape routes be provided. Many of these escape routes naturally run through the galleries and stairwells, as these are already in place by design. The safety of these escape routes must be guaranteed, which is why there are strict requirements that escape routes must meet. The so-called […]

Emergency exit, evacuation route

STABU Specification Texts for Facades, Decks, and Foundations (Industry Standard)

Architects and specification writers want to be able to include materials in specifications quickly, accurately, and without risk. That is why Fiberplast Group provides STABU specification texts for its key systems in accordance with the Ketenstandaard methodology. With our specifications, you can easily specify fire-safe, circular, and technically sound solutions for facades, decking, and foundations—fully […]

Stabu Chain Stand

Fiberplast and Circular Construction

Circular Construction with Fiberplast Biobased and Circular Building Materials for the Built Environment The construction industry is facing a major transition toward circular construction and biobased materials. Governments, architects, and clients are increasingly seeking sustainable alternatives to traditional building materials that have a lower environmental impact. For many years, Fiberplast Group has been supplying innovative […]

Circular economy, biobased products

Spring Agreement 2.0: Improving Detachability

Over the past few months, Fiberplast Group has been involved in developing the Spring Agreement 2.0. The goal of the Spring Agreement was to improve the demountability of building materials and to promote circularity in the broadest sense of the word. The Spring Agreement 2.0 is a multi-year program aimed at embedding circular industrial construction […]

Circular logo 940x560

Price Alert

Price Alert: Transportation and Raw Materials Due to the current geopolitical unrest in the Middle East, we are seeing sharp increases worldwide in both transportation costs and raw material prices. Fiberplast Group is also directly feeling the effects of this. In particular, diesel, ocean freight, and various raw materials (such as PVC, polymers, and additives) […]

Euro symbol
We zoeken naar meer..
Call me back

Want to learn more about our products or what we can offer? 

Please provide your contact information, and we’ll get back to you as soon as possible.

Fiberplast Group does not sell directly to individuals; you can order tile and floor underlays from our online store at www.tegeldrager.nl

Request a Sample

Feel free to request one or more samples with no obligation and let yourself be inspired. If you’d like a specific type and/or color, please indicate that in the comments field below.

Fiberplast Group does not sell directly to individuals, with the exception of our online store at www.tegeldrager.nl, where you can purchase floor, deck, and tile supports.